XCELTHERM® Electrical Insulating Oil (Type II) meets military standard specifications for electrical oil applications. XCELTHERM® EIO-II has and is high electrical resistance both thermally and oxidatively stable. XCELTHERM® EIO-II is intended for use in most common electrical insulating oil applications where normal oxidation resistance is required. It is compatible with other electrical insulating oils, including Shell Diala® A.
ISO 9001: 2015 Certification Number
C2021-00038
National Stock Numbers Available From Radco
9160-01-419-0888 Gallon
9160-00-926-2124 5-Gallon Pail
9150-00-075-9816 55-Gallon Drum
|
Characteristics
|
Test Method
|
Limit
|
Typical ResultS
|
||||||||||||
| Physical: | |||||||||||||||
| Aniline Point °C |
ASTM-D611
|
63-84
|
70.4
|
||||||||||||
| Color |
ASTM-1500
|
0.5 max
|
<0.5
|
||||||||||||
| Flash Point, Minimum °C |
ASTM-D92
|
146
|
154
|
||||||||||||
| Interfacial Tension (@25°C) MIN |
ASTM-D971
|
40 dynes/cm
|
50 dynes/cm
|
||||||||||||
| Pour Point °C Maximum |
ASTM-D97
|
-40°C
|
-61°C
|
||||||||||||
| Specific Gravity, 15/15°C, Max |
ASTM-D1298
|
0.91
|
0.8850
|
||||||||||||
Viscosity, max, cSt (SUS) at:
|
|||||||||||||||
| Visual Examination |
ASTM-D1524
|
Clear and Bright
|
PASS
|
||||||||||||
| Electrical: | |||||||||||||||
Dielectric Breakdown Voltage @ 60 HZ:
|
|||||||||||||||
| Dielectric breakdown voltage, impulse, conditions, @ 25°C, needle-to-sphere grounded, 1 inch (25.4mm) gap |
ASTM-D3300
|
145 kV
|
274 kV
|
||||||||||||
| Gassing Tendency, max, uL/min |
ASTM-D2300
|
+30
|
+12
|
||||||||||||
Power Factor, 60 HZ
|
|||||||||||||||
| Chemical: | |||||||||||||||
Oxidation Stability @ 72 hrs:
|
|||||||||||||||
Oxidation Stability @ 164 hrs:
|
|||||||||||||||
| Oxidation Stability (RBOT), min |
ASTM-D2112
|
195
|
243
|
||||||||||||
| Oxdation Inhibitor content, max, % by mass |
ASTM-D2668
|
0.3
|
0.27
|
||||||||||||
| Corrosive Sulfur |
ASTM-D1275
|
Non-corrosive
|
Non-corrosive
|
||||||||||||
| Water, max, ppm |
ASTM-D1533
|
35
|
15
|
||||||||||||
| Neutralization No, TAN, mg KOH/g |
ASTM-D974
|
0.03
|
<0.01
|
||||||||||||
| PCB Content, ppm |
ASTM-D4059
|
Not Detectable
|
Not Detectable
|
||||||||||||
Contact us for any further information.
Reviews
There are no reviews yet.