S-2067-HD (MIL-R-83936-B) is a solvent based hot tank paint remover, specifically designed for removing paint from aircraft wheels and landing gear components and meets the requirements of SAE-AMS-1374 Type 2 Class 1 and U.S. Military Specification MIL–PRF–83936.
Application
S-2067-HD is applied, mainly to remove paint coatings from the landing gear wheels of aircrafts. Removes also the most types of paint coatings such as polyurethanes, epoxies, nitrocellulose etc.
It is safe for all metals and does not attack the anodic coatings. Except paints removes also oils, greases, carbon deposits etc.
Usage
S–2067-HD is used full strength at a temperature of 65-80 oC.
The parts are immersed in such a way to assume that they are in contact with the lower layer which is the active one. Allow parts to remain in the product until blistering of the paint coatings.
The complete removal of the paint residues is accomplished with water under pressure.
Seal Level
Maintain seal level at 4 inches in depth and in the range of 13-15% total tank volume by the addition of clean tap water.
Product properties
Appearance : Liquid of two layers.
pH (lower layer) : > 10.
General Information
Mild steel or stainless steel tank are suitable for operating baths. The upper layer is an aqueous solution which contains catalysts, corrosion inhibitors and prevents the evaporation of the lower layer which is the active one. In time to time an addition of water is necessary in order to minimize the drag-out.
Click the link below for the data sheet for this product:
EUROCHEM SA
Contact us for any further information.
Reviews
There are no reviews yet.